Peafowl is very gorgeous bird! And what about your own peafowl on your yard or in your garden? Ther is no need to keep alive one! Make it from recycling materials – thus, you will not only decorate your territory, but save the nature!
On next pages there are a guides, how to create your own masterpiece!
All you need for work you can find on JiJi.ng! Don’t miss your chance to impress your neighbours!
Peafowl ?1
Materials:
-10l canister for body
-strong wire and plastic tubes for the feet
– wire mesh 45 to 150 cm
-polyfoam for head
-plastic bottles of various shapes and sizes
Cut a strip on canisters from the top and from the side and set back, fix it with screws or wire.
Bend the wire for the frame, put on the tube and set on the stand.
Attach a canister to the legs. Connect the legs and torso, giving the desired position for the future bird. Feet need to be fixed by the wire in several places.
Cut 8 long feathers from dark the two liter bottle and 6 short from its’ bottom. You will need about 60 plastic bottles.
Screw feathers, row by row. Use 2 bottles to shape the legs.
Bend wire mesh “round out” canister and form wing shape. The tail crop in triangle with vertices at the torso.
Create flight feathers from big bottle.
For every next row use smaller bottles.
Do you like to create something? Sell your works on the JiJi.ng – let your hobby bring in return!
Cut the head from polyfoam and grind it.
Create a comb.
Decorate the head.
Shape the neck from 2 bottles.
Use 0,5 liter bottles to create feet.
Paint your masterpiece
Make tail feathers from green bottles.
Atach them to the mesh.
Screw the tail to the body.
On next pages you will find another quide how to create a peafowl!
Like a guide? Share with friends!
Peafowl ?2
Materials:
– scissors;
– plastic bottles of different colors;
– polyfoam;
– glue;
– wooden bar;
– wire mesh;
– metal rod.
Cut out a lot of feathers from colored plastic bottles.
Feathers should be into different sizes.
Sort by size and shape blanks for breast and tail.
Don’t forget about small feathers.
Take a piece of polyfoam, cut out the pieces and glue peacock torso, neck and head. It would be better, if you will have a picture of real peafowl to make your mold more realistic.
The body must be secured on a metal rod, which had previously recommended to insert into a wooden bar.
Take the red bottle and cut a circle out of it. Then make one incision from the edge to the center and twist into a cone. Fix the beak on the foam.
Then you can paste pre-prepared feathers. Start from the bottom, with the note that the bottom feathers longer, and the top should be short. Overlap when glue them. When you’re done with the breast, move on to the back. To make the crest, you need to cut strips from the bottle and glue colored feathers.
Make the eyes.
For making the wings use wire mesh to attach feathers.
And here is a full composition!
Alternative guide on the next page! White peafowl is dazzlingly beautiful, don’t miss it!
Cut out peafowl body from polyfoam
Paint 1.5 liter plastic bottle in white. Give time to dry. Cut off the bottom and the neck of the bottle.
Cut the cylinder into pieces.
As a result, we get four equal parts of a single bottle. Snip round the side of the neck.
Cut jaggies and fold in half our “feathers”.
Paint feathers with acrylic paints for facade work.
Cut out cut out the shape of the future tail from any waterproof material – linoleum, wire mesh et.
Fasten feathers to tail.
Attach tail to the body with tacks.
Attach feathers to the body – they can be any shape.
Cut out the lolly-pop shape made of plastic, cut the serrations.
Draw the ornament.
Cut a triangle from bottle neck, paint it and fold in half.
This is beak. Fasten first down, then up.
Glue the decor on the head.
To make legs use 2 plastic bottles.
Choose a perfect place to your creation. Insert 2 tubes into leg bottles and burry them in ground.
That is not all! on next page you find another ideas!
You can make any bird following this guides!
Stay in trend with JiJi.ng!
